氟迪提供哪种氟橡胶?

氟迪已经致力于氟弹性体合成21年。工厂占地面积20000平方米,有三条现代化生产线、8套班伯里机、15套测试设备。为了保证每批订单都是完全合格的,我们有标准的生产加工,严格的质量控制体系和独特的复合配方。该产品年产量为1000吨氟聚合物,并通过了ISO9001、REG/SGS认证。

我们提供了广泛的氟弹性体,包括双酚固化共聚物,双酚固化共聚物,过氧化物固化共聚物,过氧化物固化共聚物,高氟含FKM(70%),FPEM,耐低温FKM,全氟弹性体FFFKM,FKM原胶,FKM预混物,FKM复合物,FKM化合物。

如何选择适合您的应用的氟弹性体?
如我们所知,有维坦A,B,nh,GLT等级氟弹性体。维顿A是66%氟含双酚固化共聚物,主要使用。它在大多数情况下使用,如汽车油封,轴密封,O环,垫圈,垫圈。维顿B是68%含氟的双酚固化三元聚合物。具有较高的氟容器,其耐化学性优于维顿A。它用于恶劣的环境中,无法满足要求。含氟量较B级高,含氟量约69-70%。它具有优异的抗化学性能.但是我们知道,氟含量越高,低温抵抗力就越差。因此,对于工作环境来说,有一个特殊等级的GLT等级,要求低温。一般只能在10℃的温度下,低温等级为-20~-30℃.如果您需要低温度的-40℃的氟硅树脂是一个不错的选择。氟橡胶耐酸性好,耐碱性差。如果您需要耐碱氟弹性体,我们强烈建议Fepm,它具有良好的耐碱性和耐蒸汽性。

我们的技术员和销售团队对各种氟造口器有很好的了解。我们相信我们会为您提供最优惠的优质产品。

Which fluoroelastomer FUDI provide?

FUDI has been devoted itself in fluoroelasetomer compounding for 21 years. The factory covers an area of 20000 square meters with three modern production lines, 8 sets of banbury machine, 15 sets of testing equipment. To ensure every batch of order is fully qualified, we have standard production processing, strict quality control system along with unique compounding formulations. With annual output of 1000 tons of fluoropolymer, the products passed ISO 9001, Reach/ SGS certificates.

We provide a wide range of fluoroelastomers including bisphenol curable copolymer, bisphenol curable terpolymer, peroxide curable copolymer, peroxide curable terpolymer, high-fluorine contained fkm (70%), FEPM, low temperature resistance fkm, perfluoroelastomer ffkm, fkm raw gum, fkm precompound, fkm compound ready for use.

How to select which fluoroelastomer suitable for your application?
As we know, there are viton A, B, GF, GLT grades fluoroelatomer. Viton A is 66% fluorine contained bisphenol curable copolymer, which is used mostly. It is used in most situations like automotive oil seals, shaft seals, o rings, washers, gaskets. Viton B is 68% fluorine contained bisphenol curable terpolymer. With higher fluorine container, the chemical resistance is better than Viton A. It is used in harsh environment which Viton A can’t meet requests. GF grade is higher fluorine contained than B grade, the fluorine content about 69-70%. It has outstanding performance in chemical resistance. But as we know the higher fluorine the worse low temperature resistance it has. So there is a special grade GLT grade for the working environment which low temperature is requested. Usually viton A can only stand temperature -10℃, while low temperature grade can stand for -20 to -30℃. If you need lower temperature like -40℃ fluorosilicone is a good choice. Fluoroelatomer has good resistance to acid, while it has poor resistance to alkali. If you need alkali resistance fluoroelastomer, we highly suggest FEPM, It has good resistance to alkali and steam.

Our technician and sales team has a good knowledge of various fluoroelstomer. We are sure we will provide you the good quality products with best offer.